Harken 40mm Single Protexit Exit Block

Harken 40mm Single Protexit Exit Block

When you race HARD, and you rip through as many hoists and douses as we do sailing windward leeward legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right?

Wrong! Thanks to Harken Protexit blocks, wear from side angle loading is not inevitable.

Protexit's all-alluminium, wear-resistant housing carefully ushers line in and out no matter the angle. But wait, there's more: Protexit blocks offer higher working loads than any small boat exit blocks we have ever made. Protexit aluminium sheaves rotate on sleeve bearings with Delrin sideload balls so they do not deform in extreme conditions, while reducing wear on the halyard, too.



Specification:

Sheave: 40mm

Length: 107mm

Weight: 74g

Maximum Line: 8mm

Fasteners: 6 FH mm

Fastener Spacing: 75mm

A: 19.7mm

B: 59.2mm

Maximum Working Load: 400kg

Breaking Load: 800kg

All delivery and returns information can be found here >>

Delivery Information.