Topper Topper Daggerboard Gasket

Topper Daggerboard Gasket
To fit the daggerboard gasket, you will need to take off the hull plate from underneath and remove the daggerboard moudings.
Then turn the boat over and remove the selfbailer, unscrew the daggerboard screws from the top of the deck and the centremain fixing (if it is a centremain boat).
This will enable you to prise the upper and lower parts of the deck apart to remove the old gasket and insert the new one.
When this is complete you can then reattach all items.

All delivery and returns information can be found here >>

Delivery Information.