This site uses cookies to provide and improve your shopping experience.
If you want to benefit from this improved service, please opt-in.
Cookies Page.
Hempel's Epoxy Filler 35250 is a two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons, and related products. Can be applied in thick coats up to approximately 5mm without runs or sags.
Recommended Usage:
As a filler for metals, hardwood, and other rigid materials.
For filling of pinholes in weldings and similar irregularities in steel work not later exposed to strong chemicals.
Handling:
Handle with care.
Before and during use, observe safety labels on packaging and paint containers and follow all local and national safety regulations.
Always consult Hempel’s Safety Data Sheet for this product along with the Product Data Sheet.
For professional use only
Cleanliness:
Remove oil, grease and other contaminants by suitable detergent cleaning.
Remove salts, detergents and other contaminants by high pressure fresh water cleaning.
New build:
Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC).
Clean thoroughly by hand or power tool to St 3 (ISO 8501-1) / SP 3 (SSPC). Avoid polishing.
Remove dust, blast media and loose materials.
Maintenance and Repair:
Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC).
Clean thoroughly by hand or power tool to St 3 (ISO 8501-1) / SP 3 (SSPC). Avoid polishing.
Remove dust, blast media and loose materials.
Consult Hempel's separate Surface Preparation Guidelines for more details.
Application:
Mixing ratio:
Base 35259 : Curing Agent 95250 (1 : 1 by volume)
In general, thinning is not recommended. Stir well before use.
Cleaner:
Hempel's Tool Cleaner 99610
Application conditions:
To avoid condensation, apply on a clean and dry surface with a temperature that is at least 3°C [5°F] above the dew point.
Surface temperature must be above 5°C [41°F] during application and curing.
Drying and overcoating:
Product compatibility:
Previous coat: None or according to Hempel’s specification. Recommended products are: Hempadur
Subsequent coat: According to Hempel’s Specification. Recommended products are: Hempalin, Hempadur, Hempatex.
Drying conditions:
To obtain the drying time stated, it is important to maintain sufficient ventilation during application, drying and curing.
Overcoating details
If the maximum overcoating interval is exceeded, roughening of the surface is necessary to ensure intercoat adhesion.
The surface must be dry and clean prior to application.
Other remarks
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Hempel’s Specification supersedes any recommendations given in the Product Data Sheets.
DOWNLOAD DATA AND SAFETY DATA SHEETS UNDER THE DOWNLOAD TAB BELOW FOR SAFE APPLICATION OF THIS PRODUCT.
Code:
All delivery and returns information can be found here >>
