Seldén Sonata Carbon Spinnaker Pole Complete

Lightweight 47mm carbon fibre pole designed for end-for-end gybing.

Seldén 470 Selden 42mm Spinnaker Pole

470 Selden 42mm Spinnaker Pole

Seldén Spinnaker Pole Stowage Loop Long

Seldén 420 Spinnaker Pole 42mm Tapered Tube

Seldén Spinnaker Pole Stowage Loop Short

Seldén Wayfarer Aluminium End to End Spinnaker Pole

Seldén Aluminium Tube 32mm O.D. X 1.6mm Wall Thickness, Order Per Metre (max length 5m)

Seldén Auto Pole Launch End Fitting

Seldén 39mm Single Pole Lift Eye Strop

Seldén Spinnaker Pole Adaptor for 47mm

Seldén GP14 Carbon Spinnaker Pole Complete

Seldén 42mm Tapered Aluminium Tube - 2240-2480mm ARCHIVE

Seldén 42mm Tapered Aluminium Tube - 2280-2475mm

Seldén 420 Spinnaker Pole 38mm Tapered Tube

Seldén Scorpion Aluminium Spinnaker Pole Complete

Seldén Fireball Aluminium Pole Complete

Seldén 33mm Carbon Spinnaker Pole Tube

Seldén Spinnaker Pole Adaptor for 32mm Carbon Pole

Seldén Spiro Mast Bracket / Roller Assembly

Seldén Spiro Complete Assembly

Seldén 39mm Carbon Pole 2000mm

Seldén Spinnaker Pole Piston End, Day Boat

Selden Spinnaker Pole 60mm End Fitting

Seldén Squib Spiro

Seldén 38mm Tapered Aluminium Tube - 1480-1825mm

Seldén Spinnaker Pole Piston End 22mm

Seldén Flying Fifteen Carbon Stiffened End to End Selden Spinnaker Pole

Seldén Aluminium Tube 1" (25mm) O.D. X 1.6mm Wall Thickness, Sold By The Metre (Max Length 5m)

Seldén Scorpion Carbon Spinnaker Pole End to End Complete

Seldén Aluminium Tube 50mm O.D. x 2mm wall thickness order per metre (max length 5m)

Seldén 42mm Tapered Aluminium Tube - 1670-2000mm

Seldén Spinnaker Pole Ring

Seldén Selden Pole Ramp

Seldén 42mm Tapered Aluminium Tube - 1850-2230mm

Seldén Spinnaker Pole Piston End 48mm

Composite spinnaker pole fitting The end fitting is made of glass fibre reinforced polyamide composite. This material makes for a combination of low weight and strength and it also prevents damage to boat or mast when the pole is on the fore deck. The claw has a well rounded stainless chafe guard, preventing damage to sheet and guy. The stainless, spring loaded plunger is operated at the end fitting or with a release line. Attachment holes for spinnaker pole lift and downhaul or bridles.  The inner part of this fitting has a diameter of ø39 mm and is used for Seldén ø48 and ø60 mm alu poles and ø47, ø59 and ø61 mm carbon poles. 3 Monel pop-rivets (ø4,8x12,7 mm) and a 0,5 mm thick spacer shim are included in the kit. The pop-rivets are only to be used for installation in an aluminium section - not in carbon fiber.

Seldén Flying Fifteen Spinnaker Pole complete