|Mast:||Epsilon & Alto|
|Crew Weight:||21 stone|
|Rig tension loos pro rig gauge||23 300 lbs||25 350 lbs||25 350 lbs||25 350 lbs||27 400 lbs|
|Mast at deck||Pre bend 30mm||0mm to 5mm||0mm to 5mm||Pre bend 10mm||pre bend 20mm|
|Outhaul||Ease 20mm||Ease 10mm||Tight||Very tight||Very tight|
|Kicker/Vang||Zero||Take up slack||Medium||Maximum||Maximum|
|Reason||Top tell tale will stall||2nd top tell tale should be stalling 70% of time||2nd top tell tale should be stalling 70% of time||To control twist and blade out mainsail||To control twist and blade out mainsail|
|Cunningham (close hauled)||Zero||Zero||Zero||Medium||Maximum|
|Mainsheet||Very little, do not close leach||Try to keep boom on centreline, use sufficient to control leech twist as for kicker||Try to keep boom on centreline, use sufficient to control leech twist as for kicker||Ease to keep boat balance||Ease to keep boat balance|
|Genoa/Jib from centreline||400mm||400mm||400mm||400mm||445mm|
|Genoa fairlead from transom||2700mm||2800mm||2800mm||-||-|
|New jib fairlead from centerline car||3150mm||3150mm||3090mm||3090mm||3070mm|
|Jib luff tension wrinkles||Wrinkles||Wrinkles||No wrinkles||Tight||Tight|
|Jib sheet tension||Sheet so all luff tell tales stream together||Sheet so all luff tell tales stream together||Sheet so all luff tell tales stream together||Tight but ease in gusts||Tight but ease in gusts|
24 stone A: 200mm - B: 422mm
26 stone A: 185mm - B: 430mm
28 stone + A: 170mm - B: 430mm
Mast rake: is measured from top black band ie tape measure should read 6248mm to top of black band at goosneck then read rake at top of the transom.
Pre-bend: Rig tension on, main halyard tight to goosneck, pre-bend equals distance at spreader height from mast track to halyard.
Datum: this is a pre-bend of 25mm at spreader height.
Cunningham: May also be used on a fetch in strong winds as will as a spinnaker reach as a last resort. This flattens the sail, opens the leech and spills the wind.
Mast position at heel:
mould 10 - aft bearing point to bulhead 146mm
mould 9 - aft bearing point 93mm from centreline od first set of kell bolts
New Jib: Track 150mm further forward