Paddling is all about exploring and getting
close to nature, and there’s no better family of boards for that than
the Explorer range.
Its increased thickness and capacity make it
super-stiff and stable, so it’s perfect for taller, larger paddlers and
for longer outings and a range of conditions. We like to think of it as
a ‘destination paddleboard’. The extra length means it can easily handle
a kid on the front while you paddle, or if you’re going it alone, you
can use the cargo tie-downs to take camping gear with you.
Underneath, it has a removable fin, a nose
runner fin to aid tracking in side winds, and two rear runner fins to
cancel out ‘tail drift’ when the board is loaded with gear.
MSL fusion composite and airtight coating,
MSL involves fusing a second layer of hard-wearing polymer to the
dropstitch core at the raw material stage, removing hand gluing errors.
The high-tech industrial process also saves almost 2kg in weight and
makes the boards stiffer at lower pressures.
For 2017, RPC has added a special screw
thread to all of their boards that is compatible with RAM MOUNTS
products, the world leading accessory bracket manufacturer. Enabling you
to securely attach a range of accessories, from GPS devices and cameras
to fishing rods and cup holders
All boards come as standard in our
innovative MSL Fusion technology
32" / 813mm
5.9" / 150mm
up to 150kgs / 330lbs
Red Paddle Co Backpack
FCS Connect Fin
Free water resistant phone case
THE FUTURE IS FUSION
The most innovative inflatable SUPs in the
world – Red Paddle Co’s high-performance inflatable SUPs are full of
innovation – their mantra is to design and manufacture high-quality
boards with zero compromise. This year, they’re introducing MSL fusion
technology, which stands for Monocoque Structural Laminate. This
involves an industrial process that fuses the second layer of
hard-wearing polymer to the dropstitch core at raw material stage. MSL
reduces hand-gluing errors and the amount of glue we use, which saves
2kg in weight. It also delivers greater stiffness at lower pressures –
we recommend inflating our boards to 18-20psi for ultimate performance.
Add MSL to our TecAir manufacturing process that makes our boards
stiffer, more durable, and better-performing, and our patented RSS
stiffening system, and you have inflatable boards that deliver the
world’s most authentic stand-up paddleboard experience.
LESS PUMPING, MORE PADDLING.
The Dual Cylinder system of the Titan pump
combined with the Hi Flo handle means you are in complete control of the
time and energy required to inflate your board. It puts the volume into
your board faster and reduces the effort required to reach a higher
pressure. A revolution in pumping technology!
THE BEST DESIGN. FOR THE BEST PERFORMANCE.
Tec Air is not a product, it’s a process.
RPC looked at how they built boards, and by focusing in on the key areas
of the production process, they have been able to refine each process to
make the very best boards. All Red Paddle Co boards are built using
their Tec Air specification to ensure the best possible build quality.
Their strength comes from the inside.
CARRY MORE. CARRY FURTHER.
All Red Paddle Co boards have cargo
attachments in the right place for efficient carrying of bags and gear.
The Explorer is no exception. The cargo attachments on the nose and the
tail are in the exact position to allow the board to be loaded with a
lot of gear without effecting the trim of the board.
The 12’6″ Voyager is 150mm thick. This
thickness is perfect for non surfing shapes. It gives great stiffness
and means the Explorer board has enough volume to carry a lot of
TUNE-ABILITY. YOUR CHOICE.
The Explorer utilises a low profile US box
fin system. This allows you to put in your favourite flat water fin. The
board is supplied with a fin designed to work for all round paddling. It
also has a nose runner fin to aid tracking in side winds as well as 2
rear fin runners to remove “tail drift” when the board is loaded with
GET CARRIED AWAY. EFFORTLESSLY.
After covering over 100,000 miles with their
boards RPC had a really good idea of what was needed from the ultimate
bag. The all new bag has the most significant developments yet seen with
inflatable board bags. It has integrated wheels that make travelling
through airports a pleasure. The hidden back pack system can be stowed
when not in use and is super comfy when you need to put the board on
your back. The front loading system makes packing and unpacking super
simple. The internal straps make sure the board stays put while in
transit. This bag truly is the ultimate solution for travel and storage.