Blog | Login | Currency: £
P&B Logo
Basket 0 items
Majoni Products

Majoni Majoni Buoy Fender 45x62cm (MJBUOY2)



Majoni Solid Head Buoy / Fender -  45 x 62cm

Majoni solid head buoy, white with blue ends.

Majoni guarantee the quality of their products with a dedicated control quality system. Materials and suppliers are carefully selected and and in their production system several control points are built in to test the products. Majoni fenders and buoys are made of their own special recipe of a strong UV-resistant grade of vinyl.

Majoni fenders and buoys require minimal maintenance. Wash them with clean water and if dirty with water and soap. With proper use, the fenders can protect your boat for more than forty years, which we hear gladly confirmed by satisfied customers.



Unique inflation valve

Over 60 years of excellence

Suitable for pleasurecraft and workboats

Strong UV-resistant grade of vinyl

Size 2

Diameter: 45cm

Length: 62cm

Inflation Guide

In all our fenders and buoys we use an unique strong brass valve for easy inflation and deflation. The best way to inflate a fender is just pushing air pressure from a compressor with a flat head against the valve and the fender will inflate. It is also possible to inflate the fender with a bicycle pump with the special adaptor. Please do not use a handset with a pin to inflate, because the pin can damage the valve. The best inflation pressure is 0.2 bar. This is the pressure where you should be able to press the body of the fender visible easy with your flat hand.

For deflating just push a pen slightly in the valve to let the air out. If a valve is leaking due to dirt or any other reason you can replace it with turning in a bolt M3 (or a woodscrew) and pull the valve out with a pair of tongs. After inspecting you can push a valve back in the fender with your hand or a pen.


Website Security Test